4 How to remove the door glass and door panel on a 10 plate Ford Focus.

wyre-20120903-01473.jpg

Remove this corner section which carries a small speaker, the cover is held on with three small white poppers. Remove then unplug the small speaker.

Call FREE now on : 0800 118 2641

Posted in Uncategorized | Leave a comment

5 How to remove the door glass and door panel on a 10 plate Ford Focus.

wyre-20120903-01475.jpg

Gently pull the door panel away from the door. A series of plastic clips hold the panel on.

Call FREE now on : 0800 118 2641

Posted in Uncategorized | Leave a comment

6 How to remove the door glass and door panel on a 10 plate Ford Focus.

wyre-20120903-01476.jpg

These little plastic clips hold the door panel on just remove them with your lever tool.

Call FREE now on : 0800 118 2641

Posted in Uncategorized | Leave a comment

7 How to remove the door panel on a 10 plate Ford Focus.

wyre-20120903-01480.jpg

These little poppers hold the door panel onto the door but they need resetting, so get two lever tools and gently open the clip up

Call FREE now on : 0800 118 2641

These

Posted in Uncategorized | Leave a comment

A windscreen replacement on a 70 Grand TR8 in Bacup near Burnley.

img-20120626-01039.jpgimg-20120626-01037.jpgimg-20120626-01040.jpg

This is a Triumph TR8, its been restored by S + S Preparations in Bacup. So far the customer spent 70 Grand, I fit the front windscreen.

Call FREE now on : 0800 118 2641

img-20120626-01035.jpg

Posted in Uncategorized | 1 Comment

Windscreen replacement on a brand new BMW 5 Series in Blackburn.

img-20120618-00976.jpg

Today i did a windscreen replacement on this brand new BMW 5 Series. Nice job to do no problems and I used a gel applicator for the moisture sensor.

Call FREE now on : 0800 118 2641

Posted in Uncategorized | Leave a comment

I get asked to reseal Talbot Express windscreens all the time. This is how I do it.

wyre-20120412-00618.jpgimg-20111115-00151.jpg

Ok I am gettings lots of calls for people wanting their Talbot Express windscreens sealing up. It’s a very common problem for the Talbot Express windscreen to leak. Picture 1 shows you the product I use for sealing, it’s the best stuff on the market. I don’t mess about trying to botch the job up. What I do is remove the windscreen and refit with a brand new rubber, the new rubbers are available and not very expensive. Once the windscreen is removed I clean the aperture removing any old sealer and I check there is no rust that could cause any problems. Picture 2 shows me refiting the windscreen, it’s an indirect fitment so I lip the rubber over the aperture this is done by using thick string. Now the windscreen has been fitted go down to the next blog

Call FREE now on : 0800 118 2641

 

Posted in Uncategorized | 1 Comment

How I reseal a leaking Talbot Express windscreen.

wyre-20120412-00619.jpgwyre-20120412-00620.jpg

This is how I reseal a Talbot Express windscreen. In picture 1 it shows you some of the equipment I use, we have the windscreen sealer, a barrel gun, Plastic dibber, and glass cleaner. Now we have the windscreen refit with a new rubber we seal the windscreen by running sealer on the glass side and the body side. In picture 2 you can see I have pushed the nozzle in between the rubber and the windscreen, I then go round the windscreen with the sealer, The glass side I do the sides and bottom and the body side I do top and sides. Once the windscreen is sealed up we remove the excess sealer, we spray some windscreen cleaner on it then use a card to remove the excess. Job done.

Call FREE now on : 0800 118 2641

 

 

Posted in Uncategorized | Leave a comment

A windscreen replacement and scuttle strip down on a bmw 3 series 55 plate in Blackpool.

 

blackpool-20120411-00614.jpgblackpool-20120411-00589.jpg

On the post below we take a detailed look at how we remove a scuttle assembly for a BMW 3 series.

Call FREE now on : 0800 118 2641

Posted in Uncategorized | 2 Comments

This is how we remove the scuttle assembly on a BMW 3 Series 55 plate in Blackpool.

Untitled from Paul webster on Vimeo.

The scuttle assembly on a Bmw 3 series 55 plate is a bit of a strip down. Above we have a series of pictures that show you how we strip down the scuttle in preperation for the car windscreen replacement. Pic 1 Remove six screws. Pic 2 Remove the plastic cowling. Pic 3 There are two sensors  that need removing, one just unplugs the other one twist and pulls out. Pic 4 Same again the opersite sensor. Pic 5 We have two plastic cowling that need removing, we flick open the little clips with our hook tool. Pic 6 Removing one of the plastic cowlings. Pic 7 At the front of the scuttle assembly we pull out this wire loom holder. Pic 8 In the bottom corners there are two nuts that hold this part of the assembly in place, we remove them. Pic 9 Removing this part of the scuttle assembly. Pic 10 We remove the pipe for the wiper jets. Pic 11 We remove the wipers. Pic 12 We unplug two conectors for the wiper jets. Pic 13 We pull off a rubber seal. Pic 14 Sorry i am having trouble uploading pic 14, We pull down the final part of the scuttle, this is held to the windscreen with a plastic glass edge rib which goes back onto the new windscreen ready for refitting the scuttle assembly.

As you can see a bit complex but these Bmws are a nice job to do. You can click on each picture to get a close up view.

  Call FREE on : 0800 118 2641

 

 

Posted in Uncategorized | 1 Comment

Just another look at my Aegis Solo 2 one man lifting tool.

chorley-20120229-00396.jpgchorley-20120229-00395.jpgchorley-20120229-00399.jpg

This is the best tool ever, my Aegis Solo 2 one man lifting tool.

Call FREE now on : 0800 118 2641chorley-20120229-00400.jpg

Posted in Uncategorized | Leave a comment

Vandalism on a Ford Focus rear quarter windscreen in Preston.

fylde-20120213-00360.jpgfylde-20120213-00358.jpg

Well here we go again, another spate of mindless vandalism in Preston

Call FREE now on : 0800 118 2641

 

Posted in Uncategorized | 1 Comment